MANUAL UNDERFLOOR SAW FOR WOOD EVOM I 400 WOOD

‹ ›

MANUAL UNDERFLOOR SAW FOR WOOD EVOM I 400 WOOD

Precise miter cuts with manual control for professional wood processing

The MANUAL UNDERFLOOR SAW FOR WOOD EVOM I 400 WOOD was developed for users who require the highest cut quality,stable angular accuracy and reliable repeatability. The underfloor principle ensures that the saw blade moves in a controlled manner from bottom to top into the workpiece. This keeps the wood profile securely on the support while the operator precisely controls feed and cut guidance.

Why a manual underfloor saw for wood is the right choice

Maximum control in every cut

For wood,wood strips and profiles,manual operation is a real advantage: feed rate,cut point and material guidance can be adjusted with sensitivity. This produces exact cuts even with changing cross-sections and sensitive visible edges.

Clean,low-tear-out cut edges

In combination with a suitable carbide-tipped saw blade,the EVOM I 400 WOOD delivers smooth,low-tear-out cut surfaces. This is especially important for frames,trims and visible joints in interior finishing.

Stability and long service life in everyday workshop use

The heavy,low-vibration machine bed reduces oscillations,protects bearings and the saw blade and ensures consistently precise results even in daily operation.

Technical features of the EVOM I 400 WOOD

Performance data

Saw blade diameter Ø 400 mm carbide-tipped
Speed 3,000 rpm
Motor power 2.2 kW 3 HP
Voltage frequency 400 V 50 Hz

Angle system and cutting ranges

Cutting angle from minus 45 degrees to plus 45 degrees
Detent positions at 0 degrees,15 degrees,22.5 degrees,30 degrees,45 degrees right left
Manual hand guidance for controlled feed

Clamping technology and safety

Clamping system manual hand clamps for secure workpiece fixing
Safety cover closed with safety sensor cutting only with the cover closed

Pneumatics

Air pressure 6 to 8 bar
Air consumption 15 L per minute

Design highlights for precise wood profiles

Cast bed for maximum repeatability

The solid construction ensures high stability,exact angular accuracy and clean cut guidance for wood profiles,trims and framing timber.

Ergonomic operation for efficient workflows

The operating logic is designed for fast,safe work processes. This makes the machine suitable for workshop,installation and small series without time-consuming setup times.

Protection concept for clean and safe work

The closed cover supports safe operation and ensures a tidy work area with fewer chips in the surroundings.

Typical application areas

Interior finishing and trim production

Exact miters on skirting boards,cover strips,decorative trims as well as profiles for wall and ceiling cladding.

Frame construction and furniture production

Precise angle cuts for frame moldings,furniture frames,fit strips and visible corner joints.

Workshop and installation

Ideal for changing profiles and quick changeovers for cutting,miters and fitting work directly at the workplace.

Workflow in practice

Fast,clear and reproducible

Place the workpiece,clamp manually,set the angle,close the cover,perform the cut.
This concept delivers reliable results with minimal rework.

Conclusion

The MANUAL UNDERFLOOR SAW FOR WOOD EVOM I 400 WOOD stands for precise mechanics,safe operation and durable industrial technology. It is the ideal solution for professional wood processing where angular accuracy,clean cut edges and manual control are the main focus.

EVOMATEC machines for precise profile processing
Request technical consulting: info@evomatec.de