CIRCULAR SAW BLADES FOR ALUMINIUM WITH 700 MM EVO SAW A700

‹ ›

Circular Saw Blade for Aluminium Profiles with Ø 700 mm and 120 Negatively Set Teeth EVO SAW A700

Maximum Cutting Accuracy and Stability for Aluminium, Aluminium Profiles, and Solid Material with Industrial Precision

In professional aluminium processing, not only the saw machine is crucial for success, but also the quality of the tool. A high-quality circular saw blade for aluminium must be capable of cutting consistently burr-free at high production volumes and reproducing the set dimensions accurately over long periods. The EVOMATEC EVO SAW A700 was specifically developed for this demanding continuous use in series production.

The circular saw blade for aluminium profiles EVO SAW A700 operates with a diameter of Ø 700 mm and 120 negatively set teeth. This special tooth geometry ensures a controlled, smooth cut, allowing aluminium to be cleanly separated without grabbing the material or unnecessarily stressing the surface. The result is precise cut edges that are suitable for a variety of applications, including more demanding aluminium solid profiles, massive aluminium profiles, and aluminium solid material profiles.

Process Reliability at High Throughput

Developed for precise cuts and consistent dimensional accuracy in series cutting

In series production, it is not only individual cuts that matter, but the constant stability over entire production runs. As soon as high cycle rates and varying cross-sections are used in aluminium processing, the circular saw blade for aluminium profiles becomes the crucial interface between efficiency and rework. The EVO SAW A700 was designed for these challenges to ensure a consistently clean surface and precise dimensional accuracy even at high cutting rates.

Especially when cutting thin-walled profiles, sensitive surfaces, and complex system profiles, the cutting quality remains constant, significantly reducing scrap and making assembly processes more efficient.

The Benefits of Ø 700 mm Diameter in Aluminium Manufacturing

More Cutting Reserve, Greater Stability, and Better Results with Difficult Cross-Sections

A circular saw blade for aluminium with Ø 700 mm not only provides more engagement reserve but also offers more stable cutting guidance and controlled cutting forces. These properties are particularly important when cutting demanding aluminium profiles or solid materials, where reliable chip removal and uniform material removal are necessary.

The EVO SAW A700 is the ideal solution for:

• Aluminium profiles in series cutting

• Aluminium solid profile and massive aluminium profile

• Aluminium solid material profile with high material density

• Aluminium solid bar for precise cut-off cuts

• Aluminium flat bar for clean edges without rework

• Aluminium square bar for precise and angle-accurate cuts

• Aluminium round bar for uniform, smooth cutting surfaces

This stabilized cutting characteristic ensures a controlled cut without surface damage, even with harder and thicker cross-sections.

The Importance of Negatively Set Teeth for Controlled Cutting

Smoother Cutting, Less Grabbing, and Reduced Burr Formation

The negatively set teeth of the EVO SAW A700 are specifically developed to efficiently and precisely cut aluminium. In the case of aluminium profiles and solid materials, improperly shaped teeth tend to grab the material, cause vibrations, or create edge defects. The negative tooth setting reduces this effect and ensures an even cutting pattern.

In practice, this means:

• Stable cutting even at high feed rates

• Significantly reduced tendency to grab

• Clean cut edges on sensitive aluminium surfaces

• Less burr formation and reduced rework

• Higher process reliability with varying cross-sections

Especially with massive aluminium profiles or aluminium solid bars, this precise cutting guidance quickly proves its worth as the cut remains stable, and the surface quality stays consistently good.

Precision and Cost Efficiency in Series Production

Tolerant Stable Cuts for Higher Efficiency and Less Rework

In series production, dimensional accuracy is more than just a technical requirement – it is a critical cost factor. Every rework of mitres, cut surfaces, or parts reduces efficiency and increases scrap. The EVO SAW A700 is designed to deliver stable and precise cuts that optimize the production flow.

Production benefits include:

• Better fit for assembly

• Less scrap due to more precise cutting measurements

• Reduced tool costs due to longer tool life

• Fewer interruptions due to fewer tool changes

• Consistent quality at high daily volumes

With the EVO SAW A700, companies benefit from a more stable production schedule and more efficient processes.

Robust Manufacturing Quality for Continuous Performance

Durable, Stable, and Reliable for Continuous Operation

The EVO SAW A700 is manufactured according to the highest quality standards to ensure reliable operation even under the most demanding production conditions. In addition to selecting the right materials, the coordination of tooth geometry, blade geometry, and manufacturing precision is critical.

In practical use, the difference becomes clear: While many conventional circular saw blades for aluminium need to be resharpened or replaced after high daily loads, the cutting quality of the EVO SAW A700 remains constant over long production runs. This reduces tool costs, minimizes downtime, and stabilizes overall production quality.

For Aluminium Processors with High Throughput

Optimized for Industrial Use in High-Volume Manufacturing

The EVO SAW A700 is designed for companies that do not just cut aluminium occasionally, but regularly process it in large volumes. Typical areas of application include:

• Window and door production with high cycle rates

• Façade construction and system profiles in series

• Series cutting of aluminium profiles

• Separation of solid materials such as flat bars, square bars, and round bars

• Manufacturing lines with consistent output and high throughput

Especially when processing large quantities of aluminium profiles or aluminium solid material profiles, the high precision and long-lasting performance of the EVO SAW A700 quickly pays off.

Technical Core Data at a Glance

Circular Saw Blade Specification EVO SAW A700

• Saw Blade Diameter: Ø 700 mm

• Number of Teeth: 120 teeth

• Tooth Geometry: Negatively set, optimized for aluminium

• Application:Aluminium, Aluminium profiles, Aluminium solid profiles, solid material

• Focus: Burr-free cutting pattern, high dimensional accuracy, long tool life

Conclusion

The EVOMATEC circular saw blade EVO SAW A700 for aluminium, aluminium profiles, and solid material with Ø 700 mm and 120 negatively set teeth provides maximum precision and process reliability for industrial series manufacturing. Thanks to the stable tooth geometry and robust blade construction, the saw blade delivers consistently clean cuts, reduces rework, and contributes to better cost efficiency.

EVOMATEC – Machines and tools for precise aluminium profile machining.